Vadose Zone Journal Author Instructions
Jump to:
Related editorial links
ASA, CSSA, SSSA Editorial Policies
Publications Handbook and Style Manual
Scope
Vadose Zone Journal (VZJ) will report fundamental and applied research from disciplinary and multidisciplinary investigations, including assessment and policy analyses, of the mostly unsaturated zone between the soil surface and the groundwater table. The goal is to disseminate information to facilitate science-based decision-making and sustainable management of the vadose zone. Examples of topic areas suitable for VZJ are variably saturated fluid flow, heat and solute transport in granular and fractured media, flow processes in the capillary fringe at or near the water table, water table management, regional and global climate change impacts on the vadose zone, carbon sequestration, design and performance of waste disposal facilities, long-term stewardship of contaminated sites in the vadose zone, biogeochemical transformation processes, microbial processes in shallow and deep formations, bioremediation, and the fate and transport of radionuclides, inorganic and organic chemicals, colloids, viruses, and microorganisms. VZJ will also address yet-to-be-resolved issues, such as how to quantify heterogeneity of subsurface processes and properties, and how to couple physical, chemical, and biological processes across a range of spatial scales from the molecular to the global.
Manuscript Types
Contributions to VZJ may be reviews, updates, original articles, technical notes, comments or letters to the editor, book reviews, or rapid communications.
- Original Article. Papers that advance current knowledge on some aspect of the vadose zone. Original Article findings are interpreted to mean the outcome of scholarly inquiry, investigation, modeling, or experimentation having as an objective the revision of existing concepts, the development of new concepts, or the development of new or improved techniques in some aspect of the vadose zone.
- Technical Note. Papers that focus on new experimental, analytical, or modeling methods; generally shorter in length (~4-6 published pages).
- Invited Review. Reviews that have been invited by the journal editor.
- Review. Comprehensive reviews of existing knowledge, knowledge gaps, and new insights or concepts not previously published or at least not with the same level of detail.
- Letter to the Editor. Papers to provide a forum to discuss specific topics. 300 words or less. Published subject to review and approval by the Editor.
- Book Review. Short description of a book related to the vadose zone.
- Rapid Communication. Rapid Communications highlight time-sensitive new research results that have far-reaching impacts across the vadose zone community. The review process is accelerated and papers will be shorter and more accessible. All requests must be approved by the editor. If revision is required, the paper is released or converted to a standard article at the discretion of the editor. Provide a short justification of why this paper is rapid communication.
- Update. Short reviews of recent progress in an area related to a Focus Topic. Should not exceed 5000 words, including references and an abstract of 150 words or less.
- Data Article. Data papers comprise two parts: a standard VZJ article and a supplemental file archive containing code, data, and metadata, the latter including information on the content and licensing of the data file archive. Data file archives are reviewed to ensure the archive is readable and understandable, and that code is technically sound and can be used to reproduce key results from the paper.
The submitting author should have sent each living co-author a draft copy of the manuscript and have obtained the co-author’s assent to co-authorship of it.
The Publications Handbook and Style Manual is the official guide for the preparation and editing of papers.
Please consult our ASA, CSSA, SSSA Editorial Policies before submitting your manuscript.
Manuscript Submission
Templates
Download the VZJ Manuscript Submission Template and Pre-Submission Manuscript Formatting Checklist.
Submission
Submit manuscripts at the VZJ Manuscript Submission Site. Submissions to VZJ may not be previously published in their entirety or simultaneously submitted to any other scientific or technical journal. American Society of Agronomy (ASA), Crop Science Society of America (CSSA), and Soil Science Society of America (SSSA) journals follow the Publication Manual of the American Psychological Association (APA style) for most style points. Consult our Publications Handbook and Style Manual for information on preparing and editing papers.
Creating the Manuscript File
Microsoft Word or LaTeX files may be submitted for review. For your convenience, we encourage you to use our Word template. The manuscript should be double-spaced, using page and continuous line numbers. See our LaTex File Submission Guidelines for instructions on submitting LaTeX files.
Peer Review and Revision
All manuscripts submitted undergo single-blind peer review. Papers are assigned to a co-editor, who will assign an associate editor to solicit at least two reviews. After evaluating the completed reviews, the associate editor will recommend a decision to the co-editor. Authors will be prompted to provide a list of potential reviewers. These reviewers must not have a conflict of interest involving the authors or paper, and the editorial board has the right to not use any reviewers suggested by authors. See the ASA, CSSA, SSSA Editorial Policies information page for additional information on review policy, including the policy for appeal of manuscript review. All revisions to the manuscript during the review process will be made by the author only, and revisions will be given the same manuscript number, with an R number on the end (e.g., VZJ-2008-02-0024-ORA.R1). Each revision has the opportunity for another round of review—the manuscript status “awaiting reviewer selection” is automatic and does not indicate a resubmission. Authors have four weeks to revise and return their manuscript following reviewer and associate editor comments. Manuscripts may be released if revisions are not received in a timely manner and the paper will then have to be submitted as a new manuscript. It is common for accepted papers to have been through at least one revision.
ORCID iD
Corresponding authors are required to use an ORCID iD when submitting a manuscript. More information on ORCID can be found on their website. We encourage all authors to list their ORCID iD in the manuscript.
Data Articles
Articles designated as Data Articles in VZJ include supplemental computer code and/or data that permit readers to analyze the data in a manner similar to that presented in the article and reproduce all results from the article. The purpose of Data Articles is to provide a means for verifying the correctness of results presented in published articles and for building on results in future research and applications. See the VZJ Data Article Guidelines for more information.
Plagiarism Screening
Papers submitted to ASA, CSSA, SSSA journals are screened for plagiarism before being sent for review. If there appears to be major repetition from other sources, the editor will evaluate the duplication and take appropriate action as warranted.
Language Editing
Particularly if English is not your first language, you may wish to have your paper edited for language. This is not a mandatory step but may help to ensure that the scientific content of your paper is fully understood by journal editors and reviewers. Language editing does not guarantee that your manuscript will be accepted for publication. Authors are liable for all costs associated with English language editing.
Article Requirements
Manuscripts submitted for review should be MS Word files. File sizes are restricted to 10 MB. All sections of the manuscript should be double-spaced. Include page numbers and line numbers. LaTex Files? We are now accepting LaTex files. If the paper is accepted, it will be sent to a vendor for conversion before regular production can begin.
The file should contain the following elements:
- Title page
- Core ideas
- Abstract
- Abbreviations
- Text
- Supplemental Material statement
- Data Availability statement (optional)
- Conflict of Interest statement
- Author contributions
- Acknowledgments (optional)
- References list
- Figure captions*
- Tables*
- Figures*
*Tables and figures (review quality) with captions should be placed into the text document at first mention for review. Figures of accepted papers, whether in Word or LaTeX format, must also be submitted separately for production as high-resolution image files in the following acceptable formats: EPS, TIF, PDF, or JPEG, and figure captions and tables should be moved to the end of the file.
When your paper is accepted you will need to submit final files for production. Figures must be submitted for final publication as separate high-resolution image files in the following acceptable formats: EPS, TIF, PDF, or JPEG. Combine all parts of multi-part figures into a complete figure the way you prefer for it to appear in print. The production staff reserve the right to alter this for better layout or readability.
Paper Structure
Title. A short title, not exceeding 12 words, is required. It must accurately describe the manuscript contents.
Author Affiliations. On the title page, include all authors' names and complete mailing addresses. Use an asterisk in the author byline to identify the corresponding author and supply the email address of the corresponding author. Professional titles are not listed. Other information, such as grant funding, may be included here or placed in an acknowledgment. The submitting author should have sent each living co-author a draft copy of the manuscript and have obtained the co-author’s assent to co-authorship of it. From time to time, authors' names are either added or deleted from a given manuscript between the time of submission and publication. In situations such as this, the ethical and responsible manner of handling this type of change is for the lead author to advise the author being added or deleted of the addition or deletion and to notify, in writing, the Editor and Managing Editor of the journal.
Core Ideas. Include 3 to 5 summary statements that convey the core findings of the article. The purpose of these short, bullet-pointed statements is to identify the most relevant outcomes of the paper and to provide a synopsis encapsulating the significance of the research and its implications for readers. Each statement must be 115 characters or less (spaces included). If the article is accepted, the core ideas may also be used for promoting and publicizing the research.
Abstract. An informative, self-explanatory abstract, not exceeding 250 words (150 words for notes), must be included. It should state specifically why and how the study was made, what the results were, and why they are important.
Abbreviations. Prepare a list in alphabetical order of abbreviations used in your article. Do not include SI units, chemical abbreviations, or abbreviations listed in the style manual as not needing definition.
Supplemental Material. Supplemental material may be included in the online version of articles at the discretion of the editors. The material must be submitted along with the original manuscript and will undergo peer review. Authors are encouraged to submit materials that contribute to the content and quality of the article or to use supplemental material as a means to shorten the text of manuscripts. Ancillary information such as some experimental data, including schematics of apparatus and maps of study sites, or material of interest mainly to specialists, are examples of potential supplemental material. When using supplemental material to shorten the text of a manuscript, keep in mind that the Materials and Methods section should provide enough detail to allow the reader to determine whether the interpretations are supported by the data.
Supplemental tables and figures should be cited in order in the main manuscript, as Supplemental Table S1, etc. Supplemental material should be formatted with a cover sheet listing authors and manuscript title, and the number of pages, figures, and tables. Tables and figures should be numbered Supplemental Table or Supplemental Figure S1, S2, etc. The managing editor may limit the quantity of supplemental material posted. Ideally, the supplement should consist of a single PDF or MS Word file (rather than a series of files with individual images or structures). Other file types, such as Quick Time or Excel, may be allowed. Contact the managing editor with questions about file types. If submitting videos please use the format .FLV (Flash Video) with 640 x 480 or 720 x 480 (widescreen) as the resolution. If you do not have this format available to you please contact the managing editor. The following are not allowed: executables (.exe) of any kind, java script, TeX, or PowerPoint.
Include a short (one- or two-sentence) paragraph, titled “Supplemental Material,” describing the supplemental material in the main manuscript directly after the main text.
Data Availability Statement. Authors are encouraged to include a data availability statement. A data availability statement is required for dataset papers.
Conflict of Interest Statement. Authors should include a statement just before the references (or acknowledgments) section that explains any conflicts of interest. If there are none, authors should explicitly state that there are no conflicts of interest. Conflicts of interest are anything that would interfere with, or a reasonable person could perceive to interfere with, the fully transparent and objective presentation of the paper. Potential conflicts could concern intellectual property, relationships with other entities, or financial gain but are not limited to these issues. See ASA, CSSA, SSSA Editorial Policies for more information.
Author Contributions. The contributions of each author to this work must now be indicated as part of the submission process. You may provide Author Contributions at original submission, but you MUST provide the information at revised submission. The submitting author is required to assign specific author contribution roles for each coauthor, using the CRediT taxonomy to indicate their respective roles. The 14 roles are Conceptualization, Data curation, Formal analysis, Funding acquisition, Investigation, Methodology, Project administration, Resources, Software, Supervision, Validation, Visualization, Writing – original draft, and Writing – review & editing. Author Contributions will be published with the accepted article and cannot be edited after article acceptance. Therefore, you must ensure the Author Contribution information you provide is accurate prior to final acceptance.
A final acknowledgments paragraph may be included.
References. ASA, CSSA, SSSA journals follow the APA style for citations and references. The author-year system for citations is required; do not use numbered references. Refer to chapter 1 of the Publications Handbook and Style Manual for examples of our reference and citation style, in addition to following these guidelines:
- Arrange the list alphabetically by the surnames of the first authors and then by the second and third authors.
- Single-authored articles should precede multiple-authored articles for which the individual is first author.
- Two or more articles by the same author(s) are listed chronologically; two or more in the same year are indicated by a, b, c, etc.
- Only literature that is available through libraries or other readily accessible public media can be cited. Material that does not meet this standard should be cited as personal communication or unpublished data.
Tables. Follow APA style for tables. Each entry should appear in a new table cell. Do not use tabs, spaces, or graphics. Cite each table in the text in numerical order; do not use table parts (1a, 1b). Each table must be cited in the text. Table heads should be brief but complete and self-contained. Define all variables and spell out all abbreviations. Table notes can include “Notes” for general notes that apply to the entire table, superscript lowercase letters for specific notes, and asterisks and other symbols as needed for significance notes.
Figures. At submission, review-quality figures with captions should be placed into the main text document at first mention. Authors may also submit figures as separate files. If the manuscript is accepted for publication, color figures must adhere to our color-figure policy. Figures must also be submitted separately as high-resolution image files (300 dpi preferred) in the following acceptable formats: PDF, EPS, TIFF, or JPEG. PPT files are acceptable if the figure was created in PowerPoint. Width of figures should approximate desired print size, i.e., 80 mm for a one-column figure, 180 mm for a two-column figure. All figure parts should be labeled. Multi-panel figures should be submitted as one image. Biplots should have equally scaled axes with tick marks.
Spell out abbreviations on first mention in figure captions, even if they have already been defined in the main text. Define symbols used either in the caption or in a legend within the figure. For more information on figures, see Chapter 5 of the style manual.
Authors are responsible for obtaining all permissions for use of figures from other publishers; supply these releases at the time the accepted manuscript is forwarded for production. Authors are also responsible for obtaining permission from individuals whose images are included in photographs.
Math. Use keyboard formatting where possible (i.e., bold, super-/subscripts, simple variables, Greek font, etc.); if needed, use MathType.
Units of Measure. The International System of Units (SI) must be used. Other units may be indicated in parentheses after the SI unit if this helps understanding or is needed for replication of the work.
Nomenclature
Both the accepted common name and the chemical name of pesticides must be given upon first mention in the manuscript. Use chemical symbols for elements, ions, and simple compounds except at the beginning of a sentence or in a title or heading. The Latin binomial or trinomial (and authority for plants) must be included with the common name for all plants, insects, pathogens, and animals at first mention. When referring to soils, give at least the subgroup in accord with the U.S. system of soil taxonomy. Ideally, both the series and complete family name should be given.
Changes to Author Byline
From time to time, authors' names are either added or removed from a given manuscript between the time of submission and publication. In situations such as this, the ethical and responsible manner of handling this type of change is for the lead author to advise the author being added or removed of the change and to notify, in writing, the journal editor and managing editor for approval. In addition, all coauthors should notify the managing editor that they are aware of and approve of the change.
Consent and Permissions
Before submitting the paper, the corresponding author should send each living coauthor a draft copy of the manuscript and obtain the coauthors’ assent to coauthorship. Authors are responsible for obtaining all permissions for use of figures from other publishers and should supply these releases at the time the accepted manuscript is forwarded for production. Authors are also responsible for obtaining permission from individuals whose images are included in photographs. Note that ASA, CSSA, and SSSA reserve the right to publish and republish any images you submit with a manuscript.
Errata
Errata may be used by the authors of a paper to correct errors and omissions that affect the integrity of the version of record that are identified after publication. All additions and corrections are subject to editorial approval and must be approved by all coauthors before submission; corrections of minor errors or omissions will not be published. Send all errata requests to the journal’s managing editor.
Publication Fees
Mandatory Open Access Fees
Authors are assessed a mandatory open access licensing fee of $2,450 to apply an open access license at the time of publication to make the article freely available without a subscription.
Journal articles in are published open access under the CC BY-NC-ND (attribution, noncommercial, no derivatives) license. Learn more
Authors may request that their article be published under the CC BY (attribution) license. Learn more
No licensing fees are charged for invited reviews, updates, comments, book reviews, or letters to the editor.
For authors publishing in this open access journal, fee waivers and discounts may be available to qualifying corresponding authors based in low- and lower middle-income countries. Visit the waivers and discounts web page to learn more.
Institutional Funding and Transformational Agreements
Your institution or funder may be able to help with open access licensing fees through a transformational agreement. For qualified authors, fees may be covered in full or part when publishing in the journal. Visit the institutional funder payments web page to learn if you qualify and for more information.
Authors Funded by cOAlition S
If you or one of your co-authors received funding from a member of cOAlition S, there may be restrictions on where you can publish. Please check your agreement with your funder for specific details. The information and author compliance tool on this web page can help you make an informed decision about where to publish in alignment with funder and journal requirements.
Official Sources
- Spelling: Merriam-Webster’s New Collegiate Dictionary
- Plant scientific names: USDA–ARS GRIN database
- Chemical names: PubChem
- Soil series descriptions: USDA–NRCS Official Soil Series Descriptions
- Fungal nomenclature: Fungi on Plants and Plant Products in the United States (APS Press)
- ASA, CSSA, SSSA journal style: Publications Handbook and Style Manual
For questions about the format of submissions, the process of submitting a manuscript, or about the status of manuscripts that have been submitted and assigned a manuscript number, please contact the VZJ managing editor.